Tips For Replacing a Window Handle
Changing the handle on your window is a simple task that can be accomplished in the at-home comforts of your home. Follow these tips for an easy operation and a beautiful looking finish.
Begin by removing the screws to expose the screws inside the uPVC window handle. Measure the spindle to make sure you are getting the right size replacement.
1. Determine the length of the Spindle.
It is crucial to ensure the correct size of the spindle when replacing the window handle. It could affect the tightness or elasticity of the handle and whether the handle locks correctly into the window frame. The spindle is a steel shaft that connects the handle to the lock inside the window frame. The spindle can be found in the standard 8mm industry cross-section or the older versions that measure 9mm. Modern industry standards are 8mm but it wasn't always the case. It is important to confirm the measurements before purchasing a new handle.
Remove the handle. This can be done easily by turning the handle to the open position, and unwinding two screws that hold the handle in place (which are often hidden behind plastic caps which will need to removed). After removing the handle, you can measure from the base of the handle to the end of the spindle. This will give you the measurement required to purchase a new one.
There are many options available when you are looking to pick a new window handle. From sleek chrome that fits in with a modern style, to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more classic Tudor cottages with curled mongoose-tail latches. The possibilities are endless, but the most important thing is to choose a style that suits your home.
Espag handles are typically installed to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles vary between 58mm and 62mm, but there are replacements for both sizes. Window handles made of Cadenza have an entirely different dimension as they feature an bent blade that is used to operate the multi-point lock mechanism within the window.
When choosing a window handle, you should also consider the hand you use to open your door. repairmywindowsanddoors.co.uk handles aren't handed and can be used for left or right handed windows. Cranked window handles are handed and can only be used on windows that open in one direction.
2. Take the handle off
A window handle that has fallen out can be a hassle, regardless of regardless of whether the handle is damaged or worn out. The good news is, you can fix the uPVC handle yourself. You will require only some basic hand tools as well as some time to complete this process.
You must first open the window, and then ensure that it's not locked. The next step is to remove the screw caps that are holding the handle in position. After the screw caps are removed then you'll be able to take off the handle.
The handle itself is fixed to a spindle within the window frame. It is held in place by either a screw or pin according to the type of handle. The most popular handles are the inline Espagnolette and the cockspur handles. Both of these types of handles are used on casement windows, including windows made of aluminium. They can be locked by using a key to prevent unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To remove the handle, you will need to use a flat blade screwdriver to release the clip holding the handle. After the clip has been released, the handle will be able to slide off the spindle. Once the handle that was previously used has been removed, you'll need to determine the length of the spindle and make sure that your new handle is a good fit.
Once you've determined the correct size for the handle, screw it into place. You will need to ensure that the new handle is firmly secured and that it is turning in the correct direction (clockwise for open, or counterclockwise for closed). It is crucial to ensure that the handle has not been installed upside down.
Replace the cap screws. After you've completed this step, you can test the handle to be sure that it's working properly. You should also test the locking mechanism by moving the handle to the locked position and then back to the locked position.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is often the first item to show signs of wear and wear and tear or damage. This could be due to natural elements or by regular use, or malicious damage caused by opportunistic criminals who might wish to open a locked window and gain access to your home. A simple repair can fix the problem and prevent it from occurring again.
UPVC handles can be difficult to open when the locking mechanism isn't working properly. It's often possible to solve the issue by replacing the multipoint locking mechanism, rather than the whole handle. This could help you save money.
After you've removed the old handle you'll need to remove the screws that were that held it in place. The screws are typically located on the inside of the handle base. You may need to use a screwdriver for this and it's crucial that you don't over tighten as this can cause the handle to become loose.
You will then need to locate the fixing screws or pins that keep the new handle in place. They are typically located on the inside of the base of the handle. You'll need a screwdriver to take them off. If you wish to replace them, you should replace the caps on the screws and test the handle to make sure it functions properly.
When you're ready for installing the new handle, simply align the spindle with the cutout in the window mechanism and screw it in place. If you're looking to replace the screw covers ensure that the handle is in a position that is open and any screws are securely attached. Once this is complete you're done and can enjoy your newly replaced window handle. Hopefully this will help you avoid the need for expensive window and door replacement services in the future. Contact us if you need more information on this or any aspect of your uPVC window.
4. Install the new handle
Whether you're replacing a broken handle or simply updating it, the process is surprisingly easy and can be accomplished in a matter of a few steps. Identifying the type of window handle, determining its spindle length and knowing what tools you'll need to complete the task are key. Safety is always the first priority when working with tools and windows. It is also essential to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.
The first step is to locate the screws that hold your current window handle in place and remove them, while keeping an appropriate grip on the handle itself to prevent it from crashing and result in injury. Once the screws have been removed, you can put them in a secure location to be replaced later.
After the handle that was used previously has been removed, you can now begin to install your new one. It is essential that the handle fits perfectly to ensure it functions correctly and locks the window in its place. The next step is to slide the metal square to the back of the handle into the hole of your window mechanism, making sure it fits securely.
The last step is to replace the screws caps and test the handle to ensure that it works. If you aren't satisfied with the outcome or if your window doesn't open and close as it should the next step is to contact our experts who will be able to assist you.
Most UK homes are equipped with uPVC Windows. As such, many will need to be changed at some point due to wear and tear or breakage. The procedure is fairly simple and can be carried out by anyone with some experience in DIY. It is crucial that the handle you choose matches the dimensions and style of your window. Contact us if are unsure about the type of handle that you need. They'll be able to guide you through all the choices.